MTB Wheelset ED30

Our new wheel has been developed with the aim of a sufficiently rigid and robust product that still feels comfortable enough for harsher conditions and hard usage.

With our "Solid edge design" and the "Framed edge" we obtain a very resistant rim flange, which is protected against delamination and also withstands hard impacts. The rim is fitted with internal brass nipples. We rely on small and angularly milled spoke holes, which ensure that the spoke does not bend when lacing the wheel. So we obtain a best possible result with optimum spoke tension.

After the rim has been demoulded, we only remove the burrs. The surface will not be sanded anymore. This is our "Out Of The Box Finish".

What you see, is what you get.

AWARD WINNER | Design & Innovation Award 2019

single rim: 699,90€
wheelset: 1999,90€

  • range of use: All Mountain | Enduro
  • material: carbon
  • size: 27,5" | 29"
  • weight single rim: 445g | 475g
  • weight wheel set: 1523g | 1595g
  • width 37mm | height 25mm | rim width 30mm
  • finish: UD black | SQ black
  • holes: 28
  • asymmetrical design with 2mm offset of the spoke holes
  • Tubeless ready | Hookless Design | Disc Only
  • hubs: DT Swiss 240s
  • FW: standard 15mm | width 110mm
  • RW: standard 12mm | width 148mm
  • Freewheel: Shimano | XD
  • spokes: Sapim CX-Ray | black
  • nipple: Sapim | aluminium | internal
  • rim tape: inclusive | black
  • weight tolerance: 5%
  • weight limit: none